-
Trending Products Oxidized Wax For Foam Board - HIGH DENSITY AND HIGH MELTING POINT OXIDIZED POLYETHYLENE WAX SX-37 – HAIXING
Product Introduction: High density oxidized polyethylene wax SX-37 is high viscosity and and low acid value .it is effective for speed and increase the product gloss . Product properties: Index Value Unit Appearance White powder Density 0.99 g/cm³ Melting point 140 ℃ Acid value 7-15 mgKOH/g Viscosity@ 150°C(302°F) 10000 cps penetration@ 25°C(77°F) <0.5 dmm Product advantages: It can improve the plasticizing speed and demoulding property of products at high speed, which i... -
OEM manufacturer Paraffin Wax Same As Polyethylene - Low density and cracking Polyethylene wax SX-50 – HAIXING
Melting point ℃ 105±3℃ Viscosity cps@140 ℃ 400-500 Penetration 4-5 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Our pe wax is produced by pyrolysis (cracking )method . It has good wetting for all kinds of pigment as the pigment`s dispersion . And has the function of decreasing the system`s viscosity and increasing flowability and improve the masterbach`s production efficiency ,raise the output of production .and allow to higher pigment`s concentration . B... -
OEM/ODM Supplier Low Melting Pe Wax - CHLORINATED POLYETHYLENE(CPE 135A) – HAIXING
Appearance: white powder Breif introduction: We supply two kinds of CPE including of plastic type and rubber type. –Plastic type: Main application is as modifier impact in PVC products. It has fine multiple physical property with good low – temperature flexibility and better tearing strength. Its dissolved parameter are nearly same as PVC and it has good affinity with PVC. Under the condition of right proces sing, it can form a network composition inside of the hard PVC finish pro... -
Renewable Design for Oxidized Pe Wax Manufacturer - HIGH DENSITY AND HIGH MELTING POINT OXIDIZED POLYETHYLENE WAX SX-37 – HAIXING
Product Introduction: High density oxidized polyethylene wax SX-37 is high viscosity and and low acid value .it is effective for speed and increase the product gloss . Product properties: Index Value Unit Appearance White powder Density 0.99 g/cm³ Melting point 140 ℃ Acid value 7-15 mgKOH/g Viscosity@ 150°C(302°F) 10000 cps penetration@ 25°C(77°F) <0.5 dmm Product advantages: It can improve the plasticizing speed and demoulding property of products at high speed, which i... -
100% Original Fischer Tropsch Wax For Candles - Low melting and segment Fischer-tropsch wax :SX-F70 – HAIXING
Low melting point Fishcher-tropsch wax Product Specification : Solidification point ℃ 70℃±2℃ Penetration 0.1mm@25 ℃ 10-16 Density G/cm3@25 ℃ 0.91 Acid value mg KOH/g 0.1Max Oil content % 6Max Appearance White pallet Volatility (heat 2hours at 200 ℃) <0.5 Product applications: High grade rubber protective wax Rubber and plastic processing Demould Package and storage F.T.WAX is packed in kraft paper and woven bags with internal plastic bags or polyethylene woven bags w... -
China New Product Low Melting Point Oxidized Pe Wax - HIGH DENSITY OXIDIZED POLYETHYLENE WAX :SX-36 – HAIXING
Specification SX-36 Testing standard Softening point ℃ 140±5 ASTMN 1319 Density(g/cm3@25℃ 0.98-1 ASTMD1505 Penetration(dmm@25℃) ≤1 ASTMD1321 Molecular weight 8500-12000 ASTMD445 Acide value(mgKOH/g) 16±2 ASTMD1386 Appearance powder ……………… PVC transparent products/ransparent film lubricants SX-36 high-density oxidized polyetylene wax such as SX-36 shows outstanding performance for transparenet product application ,especially for PVC film produced by blowing and extrusion proc... -
China wholesale Plastic Lubrication Additives - Polypropylene Wax PPW-36(Lower crystalline) – HAIXING
Technical Parameters Appearance White Granule Melting point ℃ 107-115 Viscosity (170 ℃) 8000-11000 Particle size 20mesh Characteristics and Purposes PPW-36 is a high viscosity polypropylene wax . Having excellent performance in pigments wetting and dispersion, which can effectively improve the quality of polyolefin masterbatches suit for high class field metallocene propylene – ethylene polymer wax,low crsytalline and excellent thermal stability and adhesive performance ,... -
Factory source Oxidized Polyethylene Wax Structure - Cracking POLYEHTYLENE WAX : SX-115 – HAIXING
Specification SX-115 Te sting standard Melting point ℃ 115±5 ASTM D87 Viscosity 300-400 ASTM D445 Density(g/cm3@25℃ 0.93 ASTM D1505 Penetration(dmm@25℃) 2﹣4 ASTM D1321 Molecular weight 4500 ………… Appearance powder Lubricating –Act as the lubricant, cost-saving agent and release agent in the course of extruding, calendering, injecting, blowing molding of PE, PP and other plastic. offering both internal and external lubrication due to decreased friction Wetting and dispersi...
