-
Popular Design for Micronized Wax For Coating - Micronized Polypropylene Wax PPW-93 – HAIXING
Technical Parameters Appearance White Powder Dv50 6-7 Dv90 14-15 Melting Point ℃ 142 Characteristics and Purposes PPW-93 has uniform particle size and shape, high melting point, good transparency, and can be easily dispersed. PPW-0936 is suitable for solvent-based coating, provides help on extinction, can improve scratch resistance, and blocking resistance under higher temperatures. PPW-93 has synergistic effect, helps to prevent the precipitation of the silica matting agent.... -
Manufactur standard Ft Wax In Filler Masterbatch - CHLORINATED POLYETHYLENE(CPE 135B) – HAIXING
–Rubber type: As synthetic rubber in wire & cable, hose products. This product is a kind of amorphous elastomer with minimal crystal. It has lower Mooney viscosity and mastication temperature as well as excellent properties such as good processing property, excellent weathering resistance, good flex resistance and flame resistance. It can be blended with CR, CSM, NBR, EPDM, SBR and NR at any ratio. It is white powder and innocuous. Since hydrogen atoms are replaced by chlorine a... -
2022 Latest Design Polyethylene Wax Dispersion - Polymer POLYETHYLENE WAX : SX-105 – HAIXING
High melt point polyehtylene wax Melting point ℃ 100-105 Viscosity 10-60 Density(g/cm3@25℃ 0.92-0.94 Penetration(dmm@25℃) 3﹣5 Appearance powder/flake/bead/granule Used as excellent external lubricant in PVC profile,, pipe, pipe fitting, foam board, WPC products ,etc. It has good late-period lubricating ability ,and will bring more glossy appearance and lower processing torque. Used as efficient dispersant in masterbatch , filled masterbatch, modified masterbatch and functio... -
100% Original Micronized Polyethylene Wax For Painting - Polymer synthetic POLYETHYLENE WAX: SX-110 – HAIXING
High melting point ,low viscosity polyethylene wax : Melting point ℃ 105-110 Viscosity mpa.s@140 ℃ 20-60 Density(g/cm3@25℃ 0.92-0.94 Penetration(dmm@25℃) 3﹣10 Appearance powder/flake/bead 1. Used as excellent external lubricant in PVC profile,, pipe, pipe fitting, foam board, WPC products ,etc. It has good late-period lubricating ability ,and will bring more glossy appearance and lower processing torque. 2. Used as efficient dispersant in masterbatch , filled masterbatch, m... -
High melting point Fischer-tropsch wax : SX-F110 – HAIXING
High melting point Fischer-tropsch wax Congealing point ℃ >100 Melting point ℃ 108-112 Viscosity cps@140 ℃ 5-10 Penetration0.1mm(25 ℃) <1 Volatility <0.5 Density G/cm3@25 ℃ 0.91-0.94 Appearance White prill The products are produced from natural gas by the Fischer-Tropsch synthesis. Purification is followed by distillation to fractionate the respective products into their respective solidifica-tion point ranges. The Fischer-tropsch`s wax used in color masterbatch ... -
18 Years Factory Low Melting Polyethylene Wax - Low density and cracking Polyethylene wax SX-50 – HAIXING
Melting point ℃ 105±3℃ Viscosity cps@140 ℃ 400-500 Penetration 4-5 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Our pe wax is produced by pyrolysis (cracking )method . It has good wetting for all kinds of pigment as the pigment`s dispersion . And has the function of decreasing the system`s viscosity and increasing flowability and improve the masterbach`s production efficiency ,raise the output of production .and allow to higher pigment`s concentration . B... -
High melting point Fischer-tropsch wax : SX-F110 – HAIXING
High melting point Fischer-tropsch wax Congealing point ℃ >100 Melting point ℃ 108-112 Viscosity cps@140 ℃ 5-10 Penetration0.1mm(25 ℃) <1 Volatility <0.5 Density G/cm3@25 ℃ 0.91-0.94 Appearance White prill The products are produced from natural gas by the Fischer-Tropsch synthesis. Purification is followed by distillation to fractionate the respective products into their respective solidifica-tion point ranges. The Fischer-tropsch`s wax used in color masterbatch ... -
8 Year Exporter Application Of Polyethylene Wax - Cracking Polyethylene wax SX-20 – HAIXING
Product Properties Melting point ℃ 110±3℃ Viscosity cps@140 ℃ 1000 Penetration 2 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Using advantage : Act as the lubricant, cost-saving agent and release agent in the course of extruding, calendering, injecting, blowing molding of PE, PP and other plastic. lubricant and brightener to enhance plasticization, increase wayward plastic products and surface smoothness. Act as the dispersant for masterbatches, pigment...
