-
Best Price on Polyethylene Wax Composition - Cracking Polyethylene wax SX-20 – HAIXING
Product Properties Melting point ℃ 110±3℃ Viscosity cps@140 ℃ 1000 Penetration 2 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Using advantage : Act as the lubricant, cost-saving agent and release agent in the course of extruding, calendering, injecting, blowing molding of PE, PP and other plastic. lubricant and brightener to enhance plasticization, increase wayward plastic products and surface smoothness. Act as the dispersant for masterbatches, pigment... -
OEM Customized Physical Properties Of Polyethylene Wax - Polymer synthetic POLYETHYLENE WAX: SX-110 – HAIXING
High melting point ,low viscosity polyethylene wax : Melting point ℃ 105-110 Viscosity mpa.s@140 ℃ 20-60 Density(g/cm3@25℃ 0.92-0.94 Penetration(dmm@25℃) 3﹣10 Appearance powder/flake/bead 1. Used as excellent external lubricant in PVC profile,, pipe, pipe fitting, foam board, WPC products ,etc. It has good late-period lubricating ability ,and will bring more glossy appearance and lower processing torque. 2. Used as efficient dispersant in masterbatch , filled masterbatch, m... -
Ordinary Discount Ft Wax Vs Pe Wax - Polypropylene Wax PPW-25(Low melting point ) – HAIXING
Technical Parameters Appearance White Granule Melting point ℃ 99-103 Viscosity (170 ℃) 1500-2100 Particle size 20mesh Characteristics and Purposes PPW-25 is suit for high class field metallocene propylene – ethylene polymer wax,low melting point , low crsytalline and excellent thermal stability ,adhesive peformance ,chemical resistance , wetting dispersion, compatibility with other wax .strong cohesion . and high price/performance . Contents and Methods of Use Hot melt adh... -
Wholesale Fischer Tropsch Wax Composition - FISCHER-TROPSCH WAX F50 low melting point wax – HAIXING
Technical Data Melting point ℃ 50-58 Viscosity cps@140 ℃ 6-10 Penetration 0.1mm(25℃) ≤30 Thermal Stability h(12525℃) 24 Acide value mgkoh/g <0.1 Appearance White granule The products are produced from natural gas by the Fischer-Tropsch synthesis. Purification is followed by distillation to fractionate the respective products into their respective solidifica- tion point ranges. Used as excellent external lubricant in PVC profile,, pipe, pipe fitting, foam board, WPC prod... -
Wholesale Dealers of Ft Wax For Powder Coating Resin - CHLORINATED POLYETHYLENE(CPE 135A) – HAIXING
Appearance: white powder Breif introduction: We supply two kinds of CPE including of plastic type and rubber type. –Plastic type: Main application is as modifier impact in PVC products. It has fine multiple physical property with good low – temperature flexibility and better tearing strength. Its dissolved parameter are nearly same as PVC and it has good affinity with PVC. Under the condition of right proces sing, it can form a network composition inside of the hard PVC finish pro... -
Cheapest Price Oxidised Polyethylene Wax Emulsion - Cracking Polyethylene wax SX-20 – HAIXING
Product Properties Melting point ℃ 110±3℃ Viscosity cps@140 ℃ 1000 Penetration 2 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Using advantage : Act as the lubricant, cost-saving agent and release agent in the course of extruding, calendering, injecting, blowing molding of PE, PP and other plastic. lubricant and brightener to enhance plasticization, increase wayward plastic products and surface smoothness. Act as the dispersant for masterbatches, pigment... -
Good quality Fischer Tropsch Synthesis Wax - Low melting point Fischer-tropsch wax SX-F60 – HAIXING
Low melting point Fishcer-tropsch wax Solidification point ℃ 60℃±2℃ Penetration 0.1mm@25 ℃ 18-25 Density G/cm3@25 ℃ 0.91 Acid value mg KOH/g 0.1Max Appearance White pallet Volatility (heat 2hours at 200 ℃) <0.5 Using advantage: Fischer-tropsch wax main mountain in 500-1000 relative molecular mass of straight chain, saturated high-carbon alkanes, it gives the chemical fine crystal structure, narrow melting point be used, low oil content, low penetration, low mobility and ... -
China OEM Polyethylene Wax In Cosmetics - Cracking POLYEHTYLENE WAX : SX-115 – HAIXING
Specification SX-115 Te sting standard Melting point ℃ 115±5 ASTM D87 Viscosity 300-400 ASTM D445 Density(g/cm3@25℃ 0.93 ASTM D1505 Penetration(dmm@25℃) 2﹣4 ASTM D1321 Molecular weight 4500 ………… Appearance powder Lubricating –Act as the lubricant, cost-saving agent and release agent in the course of extruding, calendering, injecting, blowing molding of PE, PP and other plastic. offering both internal and external lubrication due to decreased friction Wetting and dispersi...
