-
Special Design for Microcrystalline And Polyethylene Wax - High viscosity cracking Polyethylene wax SX-70 – HAIXING
Product Properties: Melting point ℃ 110±3℃ Viscosity cps@140 ℃ 3000-5000 Penetration 4-6 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Using advantage Our pe wax is produced by pyrolysis (cracking )method . It has good wetting for all kinds of pigment as the pigment`s dispersion . And has the function of decreasing the system`s viscosity and increasing flowability and improve the masterbach`s production efficiency ,raise the output of production .and allow... -
Cheap PriceList for Pe Wax Use In Rubber As Protective Agent - CHLORINATED POLYETHYLENE(CPE 135B) – HAIXING
–Rubber type: As synthetic rubber in wire & cable, hose products. This product is a kind of amorphous elastomer with minimal crystal. It has lower Mooney viscosity and mastication temperature as well as excellent properties such as good processing property, excellent weathering resistance, good flex resistance and flame resistance. It can be blended with CR, CSM, NBR, EPDM, SBR and NR at any ratio. It is white powder and innocuous. Since hydrogen atoms are replaced by chlorine a... -
OEM manufacturer Ft Wax In Hot Melt Adhesive - CHLORINATED POLYETHYLENE(CPE 135A) – HAIXING
Appearance: white powder Breif introduction: We supply two kinds of CPE including of plastic type and rubber type. –Plastic type: Main application is as modifier impact in PVC products. It has fine multiple physical property with good low – temperature flexibility and better tearing strength. Its dissolved parameter are nearly same as PVC and it has good affinity with PVC. Under the condition of right proces sing, it can form a network composition inside of the hard PVC finish pro... -
Super Purchasing for Pe Wax Manufacturer Manufacturer - Polypropylene Wax PPW-91(Vinyl copolymer wax) – HAIXING
Technical Parameters Appearance White Granule Melting point ℃ 145 Viscosity (170 ℃) 400 Particle size 20mesh Characteristics and Purposes PPW-91 with even particle shape, good transparency, high melting point, high hardness, easy to disperse, suitable for solvent-based ink and coating, can improve the scratch resistance and can provide anti-blocking effect under high temperature.Can improve the hardness, scratch and abrasion resistance in powder coating, and abrasion resistance ... -
OEM/ODM Manufacturer Pe Wax For Plastics Processing - CHLORINATED POLYETHYLENE(CPE 135A) – HAIXING
Appearance: white powder Breif introduction: We supply two kinds of CPE including of plastic type and rubber type. –Plastic type: Main application is as modifier impact in PVC products. It has fine multiple physical property with good low – temperature flexibility and better tearing strength. Its dissolved parameter are nearly same as PVC and it has good affinity with PVC. Under the condition of right proces sing, it can form a network composition inside of the hard PVC finish pro... -
High melting Fischer-tropsch wax : SX-F115 – HAIXING
High melting point Fischer-tropsch wax： Congealing point ℃ >105 Melting point ℃ 110-115 Viscosity cps@140 ℃ 5-10 Penetration0.1mm(25 ℃) <1 Volatility <0.5 Density G/cm3@25 ℃ 0.91-0.94 Appearance White prill The products are produced from natural gas by the Fischer-Tropsch synthesis. Purification is followed by distillation to fractionate the respective products into their respective solidifica-tion point ranges. The Fischer-tropsch`s wax used in color masterbatch a... -
Europe style for Polyethylene Wax Sds - Low density cracking Polyethylene wax SX-21 – HAIXING
Product Properties: Melting point ℃ 120±3℃ Viscosity cps@140 ℃ 800 Penetration 2 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Using advantage : Act as the lubricant, cost-saving agent and release agent in the course of extruding, calendering, injecting, blowing molding of PE, PP and other plastic. lubricant and brightener to enhance plasticization, increase wayward plastic products and surface smoothness. Act as the dispersant for masterbatches, pigment... -
Factory Supply Global Fischer-Tropsch Ft Wax Market - High melting point Fischer-tropsch wax : SX-F110 – HAIXING
High melting point Fischer-tropsch wax Congealing point ℃ >100 Melting point ℃ 108-112 Viscosity cps@140 ℃ 5-10 Penetration0.1mm(25 ℃) <1 Volatility <0.5 Density G/cm3@25 ℃ 0.91-0.94 Appearance White prill The products are produced from natural gas by the Fischer-Tropsch synthesis. Purification is followed by distillation to fractionate the respective products into their respective solidifica-tion point ranges. The Fischer-tropsch`s wax used in color masterbatch ...
