-
Short Lead Time for Polyethylene Wax Fertilizer Coating - Polymer synthetic POLYETHYLENE WAX: SX-110 – HAIXING
High melting point ,low viscosity polyethylene wax : Melting point ℃ 105-110 Viscosity mpa.s@140 ℃ 20-60 Density(g/cm3@25℃ 0.92-0.94 Penetration(dmm@25℃) 3﹣10 Appearance powder/flake/bead 1. Used as excellent external lubricant in PVC profile,, pipe, pipe fitting, foam board, WPC products ,etc. It has good late-period lubricating ability ,and will bring more glossy appearance and lower processing torque. 2. Used as efficient dispersant in masterbatch , filled masterbatch, m... -
Factory source Oxidized Polyethylene Wax Structure - Low density cracking Polyethylene wax SX-21 – HAIXING
Product Properties: Melting point ℃ 120±3℃ Viscosity cps@140 ℃ 800 Penetration 2 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Using advantage : Act as the lubricant, cost-saving agent and release agent in the course of extruding, calendering, injecting, blowing molding of PE, PP and other plastic. lubricant and brightener to enhance plasticization, increase wayward plastic products and surface smoothness. Act as the dispersant for masterbatches, pigment... -
8 Year Exporter Ft Wax For Fiber Products - CHLORINATED POLYETHYLENE(CPE 135B) – HAIXING
–Rubber type: As synthetic rubber in wire & cable, hose products. This product is a kind of amorphous elastomer with minimal crystal. It has lower Mooney viscosity and mastication temperature as well as excellent properties such as good processing property, excellent weathering resistance, good flex resistance and flame resistance. It can be blended with CR, CSM, NBR, EPDM, SBR and NR at any ratio. It is white powder and innocuous. Since hydrogen atoms are replaced by chlorine a... -
Super Purchasing for Pe Micronized Wax Market - Micronized PE Wax MPE-21 for high gloss coatings. – HAIXING
Technical Parameters Appearance White Powder Dv50 4-6 Dv90 9 Melting Point ℃ 110 Characteristics and Purposes MPE-21 has uniform particle size, with very good dispersability and gloss control, used as the excellent additive for high gloss coatings. It is suitable for solvent-based flexo inks and gravure inks. It can improve the abrasion resistance, and reduce the coefficient of friction of solvent-based inks. It makes the ink of the benzene soluble and alcohol-soluble ink to h... -
Excellent quality Cracking Polyethylene Wax - High viscosity cracking Polyethylene wax SX-70 – HAIXING
Product Properties: Melting point ℃ 110±3℃ Viscosity cps@140 ℃ 3000-5000 Penetration 4-6 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Using advantage Our pe wax is produced by pyrolysis (cracking )method . It has good wetting for all kinds of pigment as the pigment`s dispersion . And has the function of decreasing the system`s viscosity and increasing flowability and improve the masterbach`s production efficiency ,raise the output of production .and allow... -
OEM Customized Physical Properties Of Polyethylene Wax - Cracking Polyethylene wax SX-20 – HAIXING
Product Properties Melting point ℃ 110±3℃ Viscosity cps@140 ℃ 1000 Penetration 2 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Using advantage : Act as the lubricant, cost-saving agent and release agent in the course of extruding, calendering, injecting, blowing molding of PE, PP and other plastic. lubricant and brightener to enhance plasticization, increase wayward plastic products and surface smoothness. Act as the dispersant for masterbatches, pigment... -
Low price for Sasol Fischer Tropsch Wax - FISCHER-TROPSCH WAX F50 low melting point wax – HAIXING
Technical Data Melting point ℃ 50-58 Viscosity cps@140 ℃ 6-10 Penetration 0.1mm(25℃) ≤30 Thermal Stability h(12525℃) 24 Acide value mgkoh/g <0.1 Appearance White granule The products are produced from natural gas by the Fischer-Tropsch synthesis. Purification is followed by distillation to fractionate the respective products into their respective solidifica- tion point ranges. Used as excellent external lubricant in PVC profile,, pipe, pipe fitting, foam board, WPC prod... -
Factory wholesale Oxidized Polyethylene Wax Emulsion - Cracking POLYEHTYLENE WAX : SX-115 – HAIXING
Specification SX-115 Te sting standard Melting point ℃ 115±5 ASTM D87 Viscosity 300-400 ASTM D445 Density(g/cm3@25℃ 0.93 ASTM D1505 Penetration(dmm@25℃) 2﹣4 ASTM D1321 Molecular weight 4500 ………… Appearance powder Lubricating –Act as the lubricant, cost-saving agent and release agent in the course of extruding, calendering, injecting, blowing molding of PE, PP and other plastic. offering both internal and external lubrication due to decreased friction Wetting and dispersi...
