-
Popular Design for Micronized Wax For Coating - Micronized Polypropylene Wax PPW-93 – HAIXING
Technical Parameters Appearance White Powder Dv50 6-7 Dv90 14-15 Melting Point ℃ 142 Characteristics and Purposes PPW-93 has uniform particle size and shape, high melting point, good transparency, and can be easily dispersed. PPW-0936 is suitable for solvent-based coating, provides help on extinction, can improve scratch resistance, and blocking resistance under higher temperatures. PPW-93 has synergistic effect, helps to prevent the precipitation of the silica matting agent.... -
Cheapest Price Ft Wax Of China - CHLORINATED POLYETHYLENE(CPE 135B) – HAIXING
–Rubber type: As synthetic rubber in wire & cable, hose products. This product is a kind of amorphous elastomer with minimal crystal. It has lower Mooney viscosity and mastication temperature as well as excellent properties such as good processing property, excellent weathering resistance, good flex resistance and flame resistance. It can be blended with CR, CSM, NBR, EPDM, SBR and NR at any ratio. It is white powder and innocuous. Since hydrogen atoms are replaced by chlorine a... -
Manufacturing Companies for Chlorinated Polyethylene Wax - Polymer synthetic POLYETHYLENE WAX: SX-110 – HAIXING
High melting point ,low viscosity polyethylene wax : Melting point ℃ 105-110 Viscosity mpa.s@140 ℃ 20-60 Density(g/cm3@25℃ 0.92-0.94 Penetration(dmm@25℃) 3﹣10 Appearance powder/flake/bead 1. Used as excellent external lubricant in PVC profile,, pipe, pipe fitting, foam board, WPC products ,etc. It has good late-period lubricating ability ,and will bring more glossy appearance and lower processing torque. 2. Used as efficient dispersant in masterbatch , filled masterbatch, m... -
High Quality for Polyethylene Homopolymer Wax - Low density cracking Polyethylene wax SX-21 – HAIXING
Product Properties: Melting point ℃ 120±3℃ Viscosity cps@140 ℃ 800 Penetration 2 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Using advantage : Act as the lubricant, cost-saving agent and release agent in the course of extruding, calendering, injecting, blowing molding of PE, PP and other plastic. lubricant and brightener to enhance plasticization, increase wayward plastic products and surface smoothness. Act as the dispersant for masterbatches, pigment... -
Super Purchasing for Pe Micronized Wax Market - Micronized PE WAX MPE-51 – HAIXING
Appearance Light yellow Powder Melting point ℃ 110 Particle size μm Dv 50 6 Particle size μm Dv 90 15 Characteristics and Purposes MPE-51 is a polyethylene wax used for water-based and solvent-based systems, and is compatible for water-based and solvent-based ink and coatings. MPE-51 can be used for water-based inks, and water-based paints which provides adhesion resistance, scratch resistance, abrasion resistance, dirt resistance, and so on. Also provides good gloss,... -
Factory source Ft Wax In Color Masterbatch - CHLORINATED POLYETHYLENE(CPE 135A) – HAIXING
Appearance: white powder Breif introduction: We supply two kinds of CPE including of plastic type and rubber type. –Plastic type: Main application is as modifier impact in PVC products. It has fine multiple physical property with good low – temperature flexibility and better tearing strength. Its dissolved parameter are nearly same as PVC and it has good affinity with PVC. Under the condition of right proces sing, it can form a network composition inside of the hard PVC finish pro... -
Factory wholesale Fischer-Tropsch Wax - Low melting and segment Fischer-tropsch wax :SX-F70 – HAIXING
Low melting point Fishcher-tropsch wax Product Specification : Solidification point ℃ 70℃±2℃ Penetration 0.1mm@25 ℃ 10-16 Density G/cm3@25 ℃ 0.91 Acid value mg KOH/g 0.1Max Oil content % 6Max Appearance White pallet Volatility (heat 2hours at 200 ℃) <0.5 Product applications: High grade rubber protective wax Rubber and plastic processing Demould Package and storage F.T.WAX is packed in kraft paper and woven bags with internal plastic bags or polyethylene woven bags w... -
Popular Design for Pe Wax Manufacturer - Polypropylene Wax PPW-25(Low melting point ) – HAIXING
Technical Parameters Appearance White Granule Melting point ℃ 99-103 Viscosity (170 ℃) 1500-2100 Particle size 20mesh Characteristics and Purposes PPW-25 is suit for high class field metallocene propylene – ethylene polymer wax,low melting point , low crsytalline and excellent thermal stability ,adhesive peformance ,chemical resistance , wetting dispersion, compatibility with other wax .strong cohesion . and high price/performance . Contents and Methods of Use Hot melt adh...
