-
Factory Supply Global Fischer-Tropsch Ft Wax Market - Low melting and segment Fischer-tropsch wax :SX-F70 – HAIXING
Low melting point Fishcher-tropsch wax Product Specification : Solidification point ℃ 70℃±2℃ Penetration 0.1mm@25 ℃ 10-16 Density G/cm3@25 ℃ 0.91 Acid value mg KOH/g 0.1Max Oil content % 6Max Appearance White pallet Volatility (heat 2hours at 200 ℃) <0.5 Product applications: High grade rubber protective wax Rubber and plastic processing Demould Package and storage F.T.WAX is packed in kraft paper and woven bags with internal plastic bags or polyethylene woven bags w... -
Factory wholesale Pe Wax Use In Masterbatch As Dispersion - CHLORINATED POLYETHYLENE(CPE 135B) – HAIXING
–Rubber type: As synthetic rubber in wire & cable, hose products. This product is a kind of amorphous elastomer with minimal crystal. It has lower Mooney viscosity and mastication temperature as well as excellent properties such as good processing property, excellent weathering resistance, good flex resistance and flame resistance. It can be blended with CR, CSM, NBR, EPDM, SBR and NR at any ratio. It is white powder and innocuous. Since hydrogen atoms are replaced by chlorine a... -
Ordinary Discount Ft Wax Vs Pe Wax - Polypropylene Wax PPW-36(Lower crystalline) – HAIXING
Technical Parameters Appearance White Granule Melting point ℃ 107-115 Viscosity (170 ℃) 8000-11000 Particle size 20mesh Characteristics and Purposes PPW-36 is a high viscosity polypropylene wax . Having excellent performance in pigments wetting and dispersion, which can effectively improve the quality of polyolefin masterbatches suit for high class field metallocene propylene – ethylene polymer wax,low crsytalline and excellent thermal stability and adhesive performance ,... -
Special Price for Polyethylene Wax Oxidizes - High viscosity cracking Polyethylene wax SX-70 – HAIXING
Product Properties: Melting point ℃ 110±3℃ Viscosity cps@140 ℃ 3000-5000 Penetration 4-6 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Using advantage Our pe wax is produced by pyrolysis (cracking )method . It has good wetting for all kinds of pigment as the pigment`s dispersion . And has the function of decreasing the system`s viscosity and increasing flowability and improve the masterbach`s production efficiency ,raise the output of production .and allow... -
OEM Customized Physical Properties Of Polyethylene Wax - High viscosity cracking Polyethylene wax SX-70 – HAIXING
Product Properties: Melting point ℃ 110±3℃ Viscosity cps@140 ℃ 3000-5000 Penetration 4-6 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Using advantage Our pe wax is produced by pyrolysis (cracking )method . It has good wetting for all kinds of pigment as the pigment`s dispersion . And has the function of decreasing the system`s viscosity and increasing flowability and improve the masterbach`s production efficiency ,raise the output of production .and allow... -
Short Lead Time for Polyethylene Wax Fertilizer Coating - High viscosity cracking Polyethylene wax SX-70 – HAIXING
Product Properties: Melting point ℃ 110±3℃ Viscosity cps@140 ℃ 3000-5000 Penetration 4-6 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Using advantage Our pe wax is produced by pyrolysis (cracking )method . It has good wetting for all kinds of pigment as the pigment`s dispersion . And has the function of decreasing the system`s viscosity and increasing flowability and improve the masterbach`s production efficiency ,raise the output of production .and allow... -
Low price for Pe Wax For Masterbatch - CHLORINATED POLYETHYLENE(CPE 135A) – HAIXING
Appearance: white powder Breif introduction: We supply two kinds of CPE including of plastic type and rubber type. –Plastic type: Main application is as modifier impact in PVC products. It has fine multiple physical property with good low – temperature flexibility and better tearing strength. Its dissolved parameter are nearly same as PVC and it has good affinity with PVC. Under the condition of right proces sing, it can form a network composition inside of the hard PVC finish pro... -
Micronized PE Wax MPE-27 – HAIXING
Technical Parameters Appearance White Powder Dv50 6 Dv90 14 Melting Point ℃ 126 Characteristics and Purposes MPE-27 is HDPE wax, with high softening point, heat resistance, high hardness, and very good dispersity. MPE-27 is suitable for solvent-based printing inks which can greatly improve the abrasion resistance. PEW-0278A can reduce the coefficient of friction, and has good adaptability with benzene-soluble ink, alcohol-soluble ink,and ester-soluble ink. NPE-27 provides exc...
