-
Reasonable price Oxidized Polyethylene Wax Manufacturer - Cracking Polyethylene wax SX-20 – HAIXING
Product Properties Melting point ℃ 110±3℃ Viscosity cps@140 ℃ 1000 Penetration 2 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Using advantage : Act as the lubricant, cost-saving agent and release agent in the course of extruding, calendering, injecting, blowing molding of PE, PP and other plastic. lubricant and brightener to enhance plasticization, increase wayward plastic products and surface smoothness. Act as the dispersant for masterbatches, pigment... -
Fixed Competitive Price Oxidized Pe Wax Applications - HIGH DENSITY AND HIGH MELTING POINT OXIDIZED POLYETHYLENE WAX SX-37 – HAIXING
Product Introduction: High density oxidized polyethylene wax SX-37 is high viscosity and and low acid value .it is effective for speed and increase the product gloss . Product properties: Index Value Unit Appearance White powder Density 0.99 g/cm³ Melting point 140 ℃ Acid value 7-15 mgKOH/g Viscosity@ 150°C(302°F) 10000 cps penetration@ 25°C(77°F) <0.5 dmm Product advantages: It can improve the plasticizing speed and demoulding property of products at high speed, which i... -
New Fashion Design for Polyethylene Wax Cosmetics - Low density and cracking Polyethylene wax SX-50 – HAIXING
Melting point ℃ 105±3℃ Viscosity cps@140 ℃ 400-500 Penetration 4-5 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Our pe wax is produced by pyrolysis (cracking )method . It has good wetting for all kinds of pigment as the pigment`s dispersion . And has the function of decreasing the system`s viscosity and increasing flowability and improve the masterbach`s production efficiency ,raise the output of production .and allow to higher pigment`s concentration . B... -
Reasonable price Fischer Tropsch Wax For Pvc Products - Low melting and segment Fischer-tropsch wax :SX-F70 – HAIXING
Low melting point Fishcher-tropsch wax Product Specification : Solidification point ℃ 70℃±2℃ Penetration 0.1mm@25 ℃ 10-16 Density G/cm3@25 ℃ 0.91 Acid value mg KOH/g 0.1Max Oil content % 6Max Appearance White pallet Volatility (heat 2hours at 200 ℃) <0.5 Product applications: High grade rubber protective wax Rubber and plastic processing Demould Package and storage F.T.WAX is packed in kraft paper and woven bags with internal plastic bags or polyethylene woven bags w... -
Reasonable price Ope Wax For Mold Release Agent - CHLORINATED POLYETHYLENE(CPE 135B) – HAIXING
–Rubber type: As synthetic rubber in wire & cable, hose products. This product is a kind of amorphous elastomer with minimal crystal. It has lower Mooney viscosity and mastication temperature as well as excellent properties such as good processing property, excellent weathering resistance, good flex resistance and flame resistance. It can be blended with CR, CSM, NBR, EPDM, SBR and NR at any ratio. It is white powder and innocuous. Since hydrogen atoms are replaced by chlorine a... -
Discountable price Pe Wax Flakes - Polypropylene Wax PPW-91(Vinyl copolymer wax) – HAIXING
Technical Parameters Appearance White Granule Melting point ℃ 145 Viscosity (170 ℃) 400 Particle size 20mesh Characteristics and Purposes PPW-91 with even particle shape, good transparency, high melting point, high hardness, easy to disperse, suitable for solvent-based ink and coating, can improve the scratch resistance and can provide anti-blocking effect under high temperature.Can improve the hardness, scratch and abrasion resistance in powder coating, and abrasion resistance ... -
Cheap PriceList for Polyethylene Wax Chemical Structure - Low density cracking Polyethylene wax SX-21 – HAIXING
Product Properties: Melting point ℃ 120±3℃ Viscosity cps@140 ℃ 800 Penetration 2 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Using advantage : Act as the lubricant, cost-saving agent and release agent in the course of extruding, calendering, injecting, blowing molding of PE, PP and other plastic. lubricant and brightener to enhance plasticization, increase wayward plastic products and surface smoothness. Act as the dispersant for masterbatches, pigment... -
Oxidized Polyethylene wax SX-60 – HAIXING
Product properties: Index Value Unit Appearance Yellow flake Density 0.94 g/cm³ Melting point 100±5 ℃ Acid value 20±5 mgKOH/g Viscosity@ 150°C(302°F) 300-500 cps penetration@ 25°C(77°F) 1-4 dmm Product Advantages: Easy to be emulsify and disperse, It can be used in dying and the finishingprocess of clothing industry after emulsifying . It can increase the fabric`s soft performance .It also can be used in the production of water based ink and shoe polish ,the moisture-proofi...
