-
Super Lowest Price Pe Wax Use In Pvc As Lubricant - CHLORINATED POLYETHYLENE(CPE 135A) – HAIXING
Appearance: white powder Breif introduction: We supply two kinds of CPE including of plastic type and rubber type. –Plastic type: Main application is as modifier impact in PVC products. It has fine multiple physical property with good low – temperature flexibility and better tearing strength. Its dissolved parameter are nearly same as PVC and it has good affinity with PVC. Under the condition of right proces sing, it can form a network composition inside of the hard PVC finish pro... -
Special Price for Cosmetic Wax - CHLORINATED POLYETHYLENE(CPE 135B) – HAIXING
–Rubber type: As synthetic rubber in wire & cable, hose products. This product is a kind of amorphous elastomer with minimal crystal. It has lower Mooney viscosity and mastication temperature as well as excellent properties such as good processing property, excellent weathering resistance, good flex resistance and flame resistance. It can be blended with CR, CSM, NBR, EPDM, SBR and NR at any ratio. It is white powder and innocuous. Since hydrogen atoms are replaced by chlorine a... -
OEM Customized Physical Properties Of Polyethylene Wax - Cracking Polyethylene wax SX-20 – HAIXING
Product Properties Melting point ℃ 110±3℃ Viscosity cps@140 ℃ 1000 Penetration 2 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Using advantage : Act as the lubricant, cost-saving agent and release agent in the course of extruding, calendering, injecting, blowing molding of PE, PP and other plastic. lubricant and brightener to enhance plasticization, increase wayward plastic products and surface smoothness. Act as the dispersant for masterbatches, pigment... -
Rapid Delivery for Micronized Wax For Ink - Micronized PE WAX MPE-51 – HAIXING
Appearance Light yellow Powder Melting point ℃ 110 Particle size μm Dv 50 6 Particle size μm Dv 90 15 Characteristics and Purposes MPE-51 is a polyethylene wax used for water-based and solvent-based systems, and is compatible for water-based and solvent-based ink and coatings. MPE-51 can be used for water-based inks, and water-based paints which provides adhesion resistance, scratch resistance, abrasion resistance, dirt resistance, and so on. Also provides good gloss,... -
Manufacturing Companies for Ft Wax For Defoamer - CHLORINATED POLYETHYLENE(CPE 135A) – HAIXING
Appearance: white powder Breif introduction: We supply two kinds of CPE including of plastic type and rubber type. –Plastic type: Main application is as modifier impact in PVC products. It has fine multiple physical property with good low – temperature flexibility and better tearing strength. Its dissolved parameter are nearly same as PVC and it has good affinity with PVC. Under the condition of right proces sing, it can form a network composition inside of the hard PVC finish pro... -
PriceList for Fischer Tropsch Wax For Stabilizer - Low melting point Fischer-tropsch wax SX-F60 – HAIXING
Low melting point Fishcer-tropsch wax Solidification point ℃ 60℃±2℃ Penetration 0.1mm@25 ℃ 18-25 Density G/cm3@25 ℃ 0.91 Acid value mg KOH/g 0.1Max Appearance White pallet Volatility (heat 2hours at 200 ℃) <0.5 Using advantage: Fischer-tropsch wax main mountain in 500-1000 relative molecular mass of straight chain, saturated high-carbon alkanes, it gives the chemical fine crystal structure, narrow melting point be used, low oil content, low penetration, low mobility and ... -
Short Lead Time for Polyethylene Wax Fertilizer Coating - High viscosity cracking Polyethylene wax SX-70 – HAIXING
Product Properties: Melting point ℃ 110±3℃ Viscosity cps@140 ℃ 3000-5000 Penetration 4-6 Density G/cm3@25 ℃ 0.92-0.94 Appearance White powder /bead/granule Using advantage Our pe wax is produced by pyrolysis (cracking )method . It has good wetting for all kinds of pigment as the pigment`s dispersion . And has the function of decreasing the system`s viscosity and increasing flowability and improve the masterbach`s production efficiency ,raise the output of production .and allow... -
Leading Manufacturer for Ope Wax For Transparent Pvc Products - Polypropylene Wax PPW-91(Vinyl copolymer wax) – HAIXING
Technical Parameters Appearance White Granule Melting point ℃ 145 Viscosity (170 ℃) 400 Particle size 20mesh Characteristics and Purposes PPW-91 with even particle shape, good transparency, high melting point, high hardness, easy to disperse, suitable for solvent-based ink and coating, can improve the scratch resistance and can provide anti-blocking effect under high temperature.Can improve the hardness, scratch and abrasion resistance in powder coating, and abrasion resistance ...
